How to fix a broken charger
Mobile phones are a very popular thing among us. For many, a day does not go by without a phone. We need a charger to keep this mobile phone running. But due to various reasons, our phone charger gets damaged. The mind then becomes upset. But there is no need to panic. Today I will try to tell you how you can repair a broken charger. Let’s have a proper step-by-step guide.
Step 1: Verify the cause of the damage
Before fixing the phone charger, you need to find out where the problem lies. You cannot begin your repair process without identifying the problem. There can be several types of problems, like the charger wire being corroded, broken wire, a burnt smell coming from the charger, a loose power socket in the charger, a loose charging port on your device, etc.
Step 2: Gather the required equipment
For a successful repair, you need some tools that will make it easier and help you solve problems. The tools are tape, small scissors, some wire that will come in handy for your new replacement, and a small screwdriver.
Step 3: Just fix a wound
Check the charger cable carefully. If there are only T-wounds, take a piece of tape and wrap it well. If the charger is simply too wound, all you have to do is replace it with a new piece of wire. To do this, cut the top of the wound wire and connect it to a new piece of wire. Twist the ends of the wire together and wrap it well with tape.
Step 4: Repair bent or broken connectors
If the connector is bent or broken,
Unplug the charger and inspect the connector carefully. Try straightening a bent connector using pliers. To avoid breaking it, be gentle.
If the connector is damaged,
Cut the old connector using wire cutters.
Strip the wires, just like you did for the broken wire.
It depends on your skill level. Connect a new connector by twisting or soldering the wires together.
To insulate the connections, cover them with electrical tape.
Step 5: Fix a loose connection
This is the next step to fixing a broken charger. Carefully open your charger casing. Use a small screwdriver to open the casing. Once opened, inspect the interior thoroughly. If there is a loose connection inside, twist the ends of the wires to fix it. If the connection is deeply disconnected, it needs to be soldered.
Step 6: Managing overheating problems
The heat issue is one of the most serious problems with chargers. Unplug your charger from the port and let it cool down. Watch carefully for any burning smells or burning spots. If no problem or disconnection occurs, try it in another house socket. If this still doesn’t fix your problem, then it’s best to replace the charger. This type of charger can be harmful to your device.
Step 7: Test the charger
Check it carefully after repairing it to see if using the above steps can solve your problem or find the cause of the problem. Plug your charger into the port first. Then check with the Swiss for any signs of sparking or burning. If not, then switch off, then switch on by inserting your phone charger. Observe for a few minutes; if it works, you are successful.
Conclusion
By following the steps above, you can fix your broken or problematic charger. Do this carefully with your patience. Don’t rush. The main task for your charger repair is to find the problem first. But if you can’t solve your problem in any way, then it is better for you to replace the charger. It will not harm your device. thank you
READ MORE : 7 easy ways to fix Earbuds
READ MORE : 7 ways to fix a doorbell
READ MORE : How to remove scratches from sunglasses easy tips